CNC Controller Retrofit: Scope, Wiring and Downtime
A retrofit is a control project, not a controller purchase. Scope the interface, the drives, the file workflow and the downtime before ordering anything.
Read Guide
Replacement & Support
Prepare a safer RichAuto controller replacement with practical wiring, firmware, manual and troubleshooting checks.
A retrofit is a control project, not a controller purchase. Scope the interface, the drives, the file workflow and the downtime before ordering anything.
Read GuideA controller that appears dead, a machine that will not move and a job that will not load are three different faults. Triage them before ordering parts.
Read GuideA firmware package is only useful when it matches the controller and board revision. Record the current version, back up parameters and keep a way back.
Read GuideA wiring reference is only safe when it matches the board revision. Identify the rails, the connector set and each signal group before connecting anything.
Read GuideMachine referencing, the work origin and the cutter's Z reference answer different questions. Check all three before investigating a position or depth error.
Read GuideAxis motion, spindle start and speed selection are different control functions. Use the symptom and installed control arrangement to narrow the checks.
Read GuideAutodesk provides a generic RichAuto DSP post. Check its supported scope and the resulting NC instructions against your machine before using a machining job.
Read GuideIdentify whether the controller cannot see the USB drive, cannot list a file, cannot load it or rejects its program before changing settings.
Read GuideUse this checklist before ordering or powering on a replacement RichAuto controller. It covers the machine, interface, wiring and configuration details that must be verified.
Read GuideLearn what to record before resetting a RichAuto DSP controller, how to protect compatibility evidence, and when to confirm model-specific instructions.
Read GuideA blank or dark RichAuto A11 screen does not by itself confirm that the controller needs replacement. Check the visible symptoms, power condition, display behavior and wiring evidence first.
Read GuideLearn how to identify the correct RichAuto manuals, wiring references and firmware resources, and when model or hardware verification is required.
Read Guide