CNC Controller Retrofit: Scope, Wiring and Downtime
A retrofit is a control project, not a controller purchase. Scope the interface, the drives, the file workflow and the downtime before ordering anything.
Read Guide
RICHAUTO GUIDES
Use these practical guides to narrow down a controller, prepare a compatibility check and troubleshoot the information that matters before ordering.
A retrofit is a control project, not a controller purchase. Scope the interface, the drives, the file workflow and the downtime before ordering anything.
Read GuideThe real difference is where the motion trajectory runs and what happens when the computer, the software or the operator changes.
Read GuideThe decision is not which controller is better. It is whether the machine needs a controlled rotary axis, and whether the rest of the machine supports it.
Read GuideA controller that appears dead, a machine that will not move and a job that will not load are three different faults. Triage them before ordering parts.
Read GuideTwo listings for the same model can differ by three times. The difference is usually in the supplied set, not the controller. Here is what a quote should itemise.
Read GuideA firmware package is only useful when it matches the controller and board revision. Record the current version, back up parameters and keep a way back.
Read GuideA11E, A11S and A11C are designations within the same controller range, not separate machines. Here is how to read the label and confirm what you have.
Read GuideA wiring reference is only safe when it matches the board revision. Identify the rails, the connector set and each signal group before connecting anything.
Read GuideA DSP controller is an offline motion controller with a handheld interface. It replaces the PC in the machining path, not the drives or the CAM software.
Read GuideMachine referencing, the work origin and the cutter's Z reference answer different questions. Check all three before investigating a position or depth error.
Read GuideAxis motion, spindle start and speed selection are different control functions. Use the symptom and installed control arrangement to narrow the checks.
Read GuideChoose between A11 and B11 by the functions your three-axis machine needs, then check the board and drive interface before planning a controller change.
Read Guide