RichAuto B58 handheld front panel and color display

RichAuto B58 handheld front panel and color display. Reference photo; confirm the supplied controller and interface-board revision.

B5X SERIES · RA-B58

RichAuto B58 Four-Axis DSP Controller

Four-axis DSP control with a color display for rotary carving and machining that needs a coordinated fourth axis.

Series: Browse the B5X controller range

4-Axis MotionColor DisplayRotary MachiningInterface Check

CINKR supplies new, genuine RichAuto controllers and supports single-unit replacement orders. Eligible faults are covered by a one-year warranty. Most orders are dispatched within three working days after payment.

The supplied components, configuration, shipping cost and delivery estimate are confirmed in your quotation. Delivery, warranty and return terms.

PRODUCT GUIDE

About the B58

Four-axis B5X DSP control for rotary carving and multi-axis machining, featuring 5-inch color display, dynamic graphical preview and 4.0 MHz pulse rates.

QUICK DECISION

Know where this controller fits before you compare specifications.

BEST FIT

Choose B58 if:

  • The machine needs a coordinated fourth axis.
  • Color-screen path preview is useful for the rotary workflow.
  • The rotary drive, CAM output and supplied interface can be matched.

CHECK BEFORE ORDERING

Confirm these details first:

  • Confirm the machine's axis configuration (4-axis) and any rotary-axis or application-specific wiring.
  • Match the existing differential drive signal, interface board and machine-side connections.
  • Confirm the exact hardware revision, power arrangement and required I/O before ordering.

CONSIDER ANOTHER MODEL IF

Consider alternatives for:

  • ATC machines
  • Simple 3-axis budgets
  • Legacy 5V boards

What the RichAuto B58 Is Designed For

The RichAuto B58 represents the flagship four-axis standalone DSP motion control architecture engineered for high-precision rotary carving machines, 3D architectural column shapers, and multi-axis CNC machining centers. Designed for demanding industrial environments, the B58 pairs four fully synchronized motion channels (X, Y, Z, and A/C) with a high-resolution 5-inch color graphical LCD display, high-speed 4.0 MHz differential pulse generation, and industrial TCP/IP Ethernet networking.

From continuous 3D contouring of intricate stone statues and wooden balusters to multi-sided rotation of mechanical parts, the B58 delivers smooth coordinate interpolation without the software crashes and latency common to PC-based controllers. Operators can simulate rotary toolpaths visually on the color screen, verify coordinate limits, and manage production routines via an ergonomic handheld pendant. Machine builders and retrofitters can request a B58 quote configured for their exact rotary drive specifications.

B58, B58E, B58S and B58C: Flagship 4-Axis Suffix Distinctions

Four-axis CNC machining centers feature controller tags designated B58, B58E, B58S, or B58C:

Model Marking Keypad Faceplate Language
B58 Base 4-axis B5X motion platform
B58E English-only keypad faceplate (Export standard)
B58S Bilingual (Chinese + English) keypad faceplate
B58C Bilingual (Chinese + English) keypad faceplate

All four-axis simultaneous rotary interpolation, 3D toolpath simulation, 4.0 MHz differential pulse generation, and firmware are identical across B58, B58E, B58S, and B58C. The only difference is the button faceplate language. Choosing between B58E and B58S depends entirely on operator language preference. Confirm whether your axis drives require standard or B58E-1 servo interface boards, then request a B58 specification review.

What Ships With a B58 Controller

Standard RichAuto B58 four-axis control packages arrive equipped with industrial hardware for cabinet integration:

  1. B58 Handheld Pendant: Premium four-axis operator terminal with 5-inch color LCD display, membrane navigation keypad, and protective rubber shock boot.
  2. B5X 4-Axis Breakout Interface Board: DIN-rail mounting interface board providing 4-axis differential step/dir outputs, 16 isolated inputs, and 16 outputs.
  3. Heavy-Duty 50-Pin Interconnect Cable: Braided shielded multi-core interface cable connecting pendant to electrical cabinet terminals.
  4. USB Computer Link Cable: Standard communication cable for parameter backup and toolpath data transfer.

Verify all terminal screw blocks and ribbon connectors for mechanical integrity prior to cabinet commissioning.

Four-Axis and Rotary Configuration

The B58 provides flexible kinematic settings matching diverse machine architectures:

  • Continuous 4-Axis Simultaneous Machining: For complex artistic sculptures, animal figures, and contoured column reliefs, all four axes move in synchronized interpolation driven by CAM post-processors.
  • Indexed Rotary Machining (3+1 Axis): For polygonal components, fluted table legs, or mortised posts, the fourth axis indexes to exact angular stops and locks while three-axis carving routines execute on each face.
  • Angular Degrees vs. Linear Mode: The fourth channel can be toggled between angular degrees (0 to 360 deg) for rotary chuck turners and linear millimeters for dual-drive gantry motor slaving or tangential blade cutters.

Verify your CAM post-processor angular output formatting prior to setting machine work zero coordinates, or request a B58 specification review.

B58E and B58E-1 Wiring Terminals

Field connections terminate at the B5X four-axis interface breakout board. Engineering documentation identifies two primary hardware revisions:

  • B58E Standard Interface Board: Utilizes industrial screw terminal blocks for 4-axis differential drive pulses, 16 sinking inputs, and multi-speed inverter outputs.
  • B58E-1 Enhanced Servo Revision: Incorporates dedicated multi-pin servo drive connectors, integrated servo alarm loops, and upgraded optical isolation for high-power AC servo drives.
Terminal Group Terminal Identification Controlled Signal Electrical Specification
Axis Motion Outputs PUL+, PUL-, DIR+, DIR- (X, Y, Z, A) Differential step and direction lines 5V RS-422 differential, 4.0 MHz max
Logic Power Input 24V+, GND Primary board DC logic supply 24V DC regulated, 2A isolated supply
Digital Inputs (1-16) IN01 through IN16 Homing, limits, tool setting touch plate Optically isolated 24V NPN sinking inputs
Digital Outputs (1-16) OUT01 through OUT16 Spindle run, multi-speed, coolant 24V open-collector transistor outputs
Handwheel Interface MPG Port Terminals Manual pulse generator connection 5V differential encoder inputs

Always inspect the physical silkscreen code on your breakout board before completing electrical cabinet connections.

Rotary Pulse Equivalents and Backlash Elimination

High-precision rotary carving demands precise calculation of rotational pulse parameters:

  • Mathematical Calculation: Compute pulse settings using Pulse Equivalent = (Motor Steps * Drive Microsteps * Gear Ratio) / 360. When driving a 50:1 harmonic gearhead with a 10,000 count/rev AC servo motor, calculate: (10000 * 50) / 360 = 1388.8888 pulses per degree.
  • Harmonic vs. Planetary Drive Mechanics: Zero-backlash harmonic gearboxes eliminate rotary reversal play, essential for crisp lettering on curved stone turnings. Planetary and worm gearheads require software backlash compensation entries in the B58 setup menu.
  • Dynamic 3D Graphical Toolpath Rendering: The 5-inch display allows rotating the simulated part in 3D perspective, verifying that rotary retract moves clear chuck jaws and fixture hardware prior to cutting.

Applying these calibration measures prevents spiral tool marks and step variances across complex 3D carvings.

Servo Drive Electronic Gearing and Four-Axis Synchronization

Achieving crisp detail on complex four-axis turnings requires precise synchronization between linear gantry motion and rotary chuck rotation:

  • Electronic Gear Ratio Matching: When pairing the B58 with AC servo drives, configure the drive internal electronic gear ratio so that input command pulses correspond with whole-number pulse equivalent values in the controller.
  • Following Error Tuning: Tune servo velocity loop gains and position loop feedforward parameters to minimize tracking lag on the rotational axis during aggressive continuous 3D contouring.
  • Backlash Compensation Verification: Test rotary reversal play using a test indicator mounted against an eccentric turning lug. Enter measured mechanical backlash values into the B58 compensation table to eliminate flat spots on circular reliefs.

Careful drive loop tuning ensures that rotational surface speeds harmonize seamlessly with gantry linear feedrates.

B58 Alarm Codes and First Checks

Diagnostic alerts on the 5-inch color display assist operators and technicians in isolating operational faults:

Screen Diagnostic Underlying Machine Condition Inspection Procedure
A-Axis Limit Overrun Commanded rotary toolpath exceeds programmed software travel Check program angular bounds; jog axis manually away from limit
Servo Drive Trip (X/Y/Z/A) Motor drive signaled an internal overcurrent or tracking fault Inspect servo drive front-panel error code; check mechanical binding
Spindle Inverter Fault Spindle drive error contact signaled to controller Read inverter display panel error code; verify cooling water flow
Emergency Stop Active E-stop button depressed or safety interlock loop broken Verify 24V continuity through normally-closed safety pushbuttons
Encoder Loss / Tracking Trip Loose encoder feedback cable on servo drive Inspect servo encoder harness shield and connector lock

Reviewing servo drive alarm registers and safety circuit continuity resolves the vast majority of operational interruptions.

Information Needed for a B58 Replacement

When ordering a replacement B58 controller, provide our technical engineering desk with the following specifications:

  1. Rotary axis gearbox reduction ratio and motor step angle to configure pulse equivalent parameters.
  2. Stepper or servo driver model numbers to confirm 5V differential step/dir signal compatibility.
  3. Breakout board silkscreen revision (B58E versus B58E-1).
  4. Photographs of the handheld unit sticker and DIN-rail terminal connections.

Submit your machine information through our B58 quotation desk for engineering review.

B58 vs A18, B18 and B51

For facilities evaluating multi-axis control packages:

  • RichAuto A18: Economical 3-inch monochrome common-anode controller for standard rotary carving tables.
  • RichAuto B18: High-speed 4.3-inch color differential controller with 2.0 MHz pulse rates for production rotary carving.
  • RichAuto B51: Three-axis flagship controller featuring the 5-inch color graphical preview interface.
  • RichAuto B58: Flagship four-axis controller combining simultaneous rotary interpolation with the 5-inch color graphical toolpath simulation display.

SELECTION CHECKLIST

How to prepare a B58 compatibility check

  1. Record rotary axis mechanical specificationsDetermine fourth axis orientation (A, B, or C), drive gearbox reduction ratio, and motor steps per revolution.
  2. Identify breakout board revisionCheck whether the DIN-rail interface card inside your cabinet is labeled B58E or B58E-1.
  3. Verify driver input signal formatConfirm that motor drives accept 5V differential pulse and direction signals up to 4.0 MHz.
  4. Review cabinet network connectivityCheck whether Ethernet network cables are routed to the electrical cabinet for remote program loading.

SPECIFICATIONS

B58 Technical Specifications

Compare the current B5X platform below. For an existing machine, match the controller label, interface board and software version; reference documents and photos may show earlier hardware.

Product modelB58
SeriesB5X
CPUDSP
Internal memoryAsk CINKR for the memory capacity of the supplied controller.
Display5-inch
CommunicationUSB / TCP/IP
Controlled axes4 axes
Control signalDifferential
Drive systemStepper / Servo — Match the supplied hardware and software version.
Inputs16 inputs
Outputs16 outputs
Additional I/OConfirm the board variant and available terminals for additional I/O.
Minimum input unit0.001 mm
Max. pulse frequency4 MHz
Power supply24V DC — Interface-board input; check its rating separately from the handle supply.
InterpolationLine / Arc / Curve — Match the supplied hardware and software version.
Breakpoint resumeSupported — Match the supplied hardware and software version.
Power-failure recoverySupported — Match the supplied hardware and software version.
Soft / hard limitSupported — Match the supplied hardware and software version.
Password protectionSupported — Match the supplied hardware and software version.
Rotary axisSupported
ATC supportNot supported
Multi-spindle / cylindersNot supported
Plasma controlNot supported
Handwheel / MPGSupported
Network communicationSupported — Match the supplied network interface and transfer workflow.

COMPARE RELATED CONTROLLERS

Compare B58 with Related Controllers.

Compare current platform applications, axes, display and I/O. Match the supplied board before replacement; earlier hardware may differ.

ModelMain useAxesDisplayI/ORelationship
B58Four-axis rotary machining with color preview4-axis5-inch16 inputs / 16 outputsSelected model
A18Four-axis rotary carvingConfirm configuration3-inch8 inputs / 8 outputsSame-class option — compare functions, wiring and signals.
B18Four-axis rotary machining4-axis4.3-inch16 inputs / 16 outputsSame-class option — compare functions, wiring and signals.
B51Three-axis routing with color preview3-axis5-inch16 inputs / 16 outputsDifferent platform — not a direct replacement. Machine-level compatibility check required.

B58 alternatives depend on the required motion and machine functions. A related model is not a promise of interchangeable wiring or firmware.

DOWNLOADS

B58 Manuals, Wiring & Firmware

Download reference documents below. Match the controller and interface-board revision before using any wiring instructions. For a replacement or new order, request the documents for the exact supplied hardware from CINKR.

B5X Motion Control System Manual (PDF)

Reference instructions and parameter guidance, mainly in English with some Chinese labels. These reference editions may describe earlier hardware; the supplied unit must match the document.

Free direct download

B58 Stepper Board Wiring (PDF)

Reference wiring diagrams with English labels and signal notation. Confirm the matching board revision before using them.

Request the matching files for your hardware revision.

B58 Servo Board Wiring (PDF)

Reference wiring diagrams with English labels and signal notation. Confirm the matching board revision before using them.

Request the matching files for your hardware revision.

FAQ

B58 — Questions to Check Before Ordering.

What distinguishes the RichAuto B58 from the A18 and B18?

The B58 serves as the flagship 4-axis platform, integrating an expansive 5-inch color LCD display with dynamic rotary toolpath simulation, a high-speed 4.0 MHz differential pulse generator, standard TCP/IP Ethernet networking, and two specialized breakout board revisions supporting high-power industrial AC servo drives.

Does the B58 support both A-axis and C-axis rotational configurations?

Yes. The fourth axis can be designated as an A-axis (rotating parallel to X), a B-axis (parallel to Y), or a C-axis (rotating parallel to Z), supporting rotary turners, rotational trunnion tables, and swiveling head arrangements.

What is the difference between B58E and B58E-1 breakout boards?

The B58E standard breakout board provides conventional terminal screw connections for stepper and hybrid systems, while the B58E-1 revision features dedicated multi-conductor servo connectors and isolated servo alarm feedback loops.

Can the B58 simulate rotary toolpaths before cutting?

Yes. The 5-inch color display renders both linear gantry paths and rotary movements, allowing operators to visually confirm boundary limits, safe retract heights, and rotary zero alignment prior to starting spindle rotation.

Does B58S render rotary 3D toolpaths in full perspective?

Yes. The 5-inch color screen renders dynamic 3D rotational toolpaths, allowing operators to verify rotary retract clearances prior to cutting.

What is the difference between B58E and B58E-1 interface boards?

B58E utilizes standard industrial terminal blocks, while B58E-1 features dedicated multi-conductor servo connectors and isolated drive alarm feedback channels.

How does the B58E fourth axis pulse equivalent differ from the B18E?

Both use identical mathematical formulas based on motor steps and gear reduction, but the B58 supports pulse frequencies up to 4.0 MHz, allowing higher rotary rapid traverse speeds.

REQUEST A QUOTE

Request a Quote for the B58

Tell us the quantity and destination country. For a replacement or upgrade, include any available machine details below. This form only prepares your message; nothing is submitted or stored.

Optional machine details
Prepare Email to CINKR

Prepare an email with your inquiry details, then send it from your email application. You can also copy the details and paste them into an email.