F1410 Manual / Wiring Reference
Terminal definitions, interface connections and installation references.
Available after model / hardware verification — request it through CINKR.F1X SERIES · RA-F1410
RichAuto F1410 Stone DSP Controller
3-4 axis stone-processing controller with intelligent surface dotting and 24I/24O board.
Stone Dotting3-4 Axis24I/24OIntelligent Dots24V DCBreakpoint Resume
Documented model information verified.Replacing an existing controller? Send your current model label and machine configuration before ordering. We verify interface board, control signal, wiring and hardware revision wherever these affect compatibility.
IS THIS MODEL RIGHT FOR YOUR MACHINE?
F1410 May Be a Good Fit If You Need:
Good fit for
- You process stone with dotting or surface-marking needs
- You want dot data remembered without extra hardware
- You need 3-axis or 4-axis motion with a 24I/24O board
- You are upgrading a stone engraving machine
Consider another model if you need
- You need general routing/wood work only
- You need ATC or plasma controls
- You want a color-screen platform
SPECIFICATIONS
F1410 Technical Specifications.
| Product model | F1410 |
|---|---|
| Series | F1X |
| CPU | DSP |
| Internal memory | 512 MB |
| Display | Monochrome · 128×64 |
| Communication | U disk · USB cable |
| Controlled axes | 3 to 4 axes · 3-axis or 4-axis motion control |
| Control signal | Differential |
| Drive system | Stepper / Servo |
| I/O | 24 inputs / 24 outputs |
| Minimum input unit | 0.001 mm |
| Max. pulse frequency | 1 MHz |
| Power supply | 24V DC |
| Interpolation | Line, Arc, Curve |
| Breakpoint resume | Supported |
| Power-failure recovery | Supported |
| Soft / hard limit | Supported |
| Password protection | Supported |
| Rotary axis | Supported |
| ATC support | Not supported |
| Multi-spindle / cylinders | Not supported |
| Plasma control | Not supported |
| Dispensing control | Not supported |
| Handwheel / MPG | Not supported |
| Network / PC control | Not supported |
KEY FUNCTIONS
What the F1410 Brings to Your Machine.
- 3-axis or 4-axis motion control mode
- Standard 24I/24O interface board
- Intelligent stone surface dotting without extra devices
- Dot data automatically memorized without file changes
- Single dotting session reads any processing file format
- Boot-screen reminder on dot-data loading for safety
COMPARE RELATED CONTROLLERS
Compare F1410 with Related Controllers.
Related options help you avoid choosing a neighboring model by accident. Cards marked “different platform” are not direct replacements.
| Model | Main use | Axes | Display | I/O | Key capability | Relationship |
|---|---|---|---|---|---|---|
| F1410 | 3-4 axis stone-processing controller with intelligent surface dotting and 24I/24O board. | 3-4 | 128×64 | 24/24 | 3-4 axis stone-processing controller with intelligent surface dotting and 24I/24O board. | This page |
Also see:
A12, A132, A14, B57 and F1410 are special-purpose models. Related cards there show platform comparisons, not interchangeability.
REPLACEMENT & UPGRADE NOTES
Ordering F1410 as a Replacement.
Stone machines vary in axis count and dotting hardware. Send machine type, axis wiring and stone-workflow details when requesting a quote.
- Confirm 3 vs 4 axis configuration
- Stone dotting wiring should be checked with machine details
DOWNLOADS
F1410 Manuals, Wiring & Firmware.
Public manuals and general wiring references are free to download. Revision-sensitive firmware and diagrams are released after the controller details are verified.
FAQ
F1410 — Questions to Check Before Ordering.
What makes F1410 special for stone?
Its intelligent stone-surface dotting function removes the need for additional dotting hardware and remembers dot data automatically.
Is F1410 3-axis or 4-axis?
It supports 3-axis or 4-axis motion modes; confirm the machine configuration when ordering.
What I/O count does F1410 use?
A standard 24I/24O interface board.
Can F1410 run other materials?
It runs standard engraving jobs too, but stone processing and dotting are its intended strengths.
REQUEST A QUOTE
Request a Quote for the F1410
Tell us whether the F1410 is for a new machine, upgrade, or replacement. Include existing hardware information where available. This form only prepares your message; nothing is submitted or stored.